TRI-SNAP Rustication

Victory Bear TRI-SNAP rustications create rustication bands (reveals) in concrete walls. The TRI-SNAP snaps open to allow nails or other fasteners to be hidden to maintain smooth, clean rustications every time. Manufactured from nonstick PVC, TRI-SNAPs clean-up easily and can be reused.

Benefits

• Better Looking - The TRI-SNAP makes fasteners virtually invisible–eliminates marks in the finish left by nail heads.
• Less Edge Seepage - Reduce the cost of clean-up. The rustication’s specially-designed seal fits tightly against the casting surface, preventing concrete seepage.
• Easy to Install - Far fewer fasteners required than wood. TRI-SNAPs can also be glued in place.
• Cleans Up Easily - Victory Bear rustications are made with PVC, an ideal material for rustications because it cleans up so easily.
• No Form Coat - You save the cost and mess of form coat since PVC does not need a bond breaker.
• Easy Storage - Rustications are stackable for storage between jobs.

Dimensions

Installation

1. Mark a line where the rustication is to be placed.
   
2. If fasteners are to be used, skip to step 3, otherwise position the TRI-SNAP in place using adhesives or tape. (see figure 1)
   
3. Open the TRI-SNAP and position it on the surface. Install fasteners through the bottom of the TRI-SNAP and into the casting surface below. (see figure 1)
   
4. Close the TRI-SNAP and check to insure that the interlocking grips are fully engaged and the rustication is pressed firmly against the casting surface.

**No Form Coat or Bond Breaker is necessary

Coefficient of Linear Expansion: .0132 inches per degree F

Storage: Materials should be stored out of direct sunlight to prevent long-term deterioration or color fading. Pieces can be stacked, but should be stored fully supported to keep them from warping.