|
SLAB SAVER
- On Duty to Protect Concrete Floors
Benefits
SLAB SAVER is a great way to protect concrete floors when tilting up poured
walls. SLAB SAVER is made from rigid, durable PVC and will not scratch
valuable new floors. It is easy to install along the bottom edge of a
poured wall.
- Eliminates Repair Time
to Floors - SLAB SAVER saves your floors from any damage. Crews
using Slab Saver won't spend valuable time and money repairing damaged
floors.
- Improved Quality
- Crews using the Slab Saver can walk away from solid finished floors
with pride.
- Easy to Install -
SLAB SAVER is set into the form prior to pouring the wall. After the
concrete has set, the SLAB SAVER stays in place along the lower edge
of the wall to protect floors from damage.
Installation
- Select 24" lengths
of Slab Saver.
- Set the Slab Savers into
the form; there should be one slab saver at each end.
If the wall is over 20 feet, place one slab saver in the center of the
wall. Add one additional Slab Saver for each additional 20 feet.
- Pour concrete normally.
Normal vibration of the concrete insures concrete will correctly surround
the Slab Saver.
- Slab Saver stays with the
wall--there's no need to remove it .
Length:
24 inches
Packaging:
40 pieces per box
Weight:
0.81 LB/LF
Coefficient
of Linear Expansion:
.0132 inches per degree F
Storage
Materials should be stored out of direct sunlight to prevent long-term
deterioration. Pieces can be stacked, but should be stored fully supported
to keep them from warping.
|
