HOME Contact Us Site Map

RUSTICATION / REVEAL

Victory Bear rustications form smooth, clean rustication bands (reveals) in concrete. 

Benefits
Overall, installation costs are reduced using Victory Bear rustications. Other benefits include:

  • Cleans up easily - Victory Bear rustications are made with PVC, an ideal material for rustications because it cleans up so easily
  • Reusable - PVC is reusable, making your investment pay off many times.
  • No form-coat - PVC does not need a form-coat or bond breaker so installation is easy and quick. 
  • Less Overflow - Rustication chamfers make a tight seal against the casting surface so concrete doesn't flow where it doesn't belong.
  • Better looking - Seam lines are minimized with standard 12 foot lengths. 
  • Easy Storage - Rustications are stackable for storage between jobs. 
Click here for photo results of Victory Bear rustications.

Dimensions
The Victory Bear patent-pending design is available in standard and low profile heights. See the dimension illustration and chart below.

 
Standard Height
Part Name
Height
"B" 
Width
"A" 
 Chamfer
angle 
Pieces
per box
Weight
lb/LF 
LF per box
Std.
lengths 
2.25 Rustication
.75"
2.25"
45°
36
0.19
432
12'-0"
2.5 Rustication
.75"
2.5"
45°
36
0.19
432
12'-0"
3.5 Rustication
.75"
3.5"
45°
16
0.27
192
12'-0"
5.5 Rustication
.75"
5.5"
45°
14
0.40
168
12'-0"
8.0 Rustication
.75"
 8.0"
45°
8
0.67
96
12'-0"
11.5 Rustication
.75"
11.5"
45°
6
1.00
72
12'-0"
Low Profile Height
Part Name
Height
"B" 
Width
"A" 
 Cha  mfer
angle 
Pieces
per box
Weight
lb/LF 
LF per box
Std.
lengths 
2LP Rustication
.5"
2"
60°
      
12'-0"
3LP Rustication
.5"
3"
60°
      
12'-0"
Base Clip
Part Name
Pieces
per box
Weight
lb/LF 
LF per box
Std.
lengths 
*Be sure to order
1' of base clip for 
each 1' of rustication.
Base Clip
60
0.07
720
12'-0"
Base ClipLP
60
0.065
720
12'-0"
Installation
  1. Fasten the base clip to the casting surface with fasteners, tape or adhesive.
  2. Press one end of the Rustication interlocking tooth grip into the end of the base clip. 
  3. Press the entire length of the rustication into the base clip. 
  4. Check to insure that the interlocking grips are fully engaged and the chamfer seal is pressed firmly against the casting surface.
**No Form Coat or Bond Breaker is necessary 
Accessories: Additional base clips are available in 12 foot lengths For the reuse of these products 

Coefficient of Linear Expansion: 0.0132 inches per degree F

Storage
If reuse is intended, it is important that all concrete residual be removed from the plastic to prevent sticking on future pours. Materials should be stored out of direct sunlight to prevent long-term deterioration or color fading. Pieces can be stacked, but should be stored fully supported to keep them from warping.